We need answer in Russian. Need detailed step-by-step instructions for Proxify VPN on MikroTik. Need start with # heading exactly theme. Use markdown. Mention personal cabinet proxify.host and official app where appropriate. Specific steps, paths, settings, config examples. Length 800-1500 words. End with "Возможные проблемы и решения". No HTML tags.

We need craft content. Need know Proxify VPN? It's VPN/proxy service with WireGuard and OpenVPN. For MikroTik likely use WireGuard easier. Need provide step-by-step: get config from personal account, install RouterOS? Need generate config in cabinet, maybe choose server, get public key, IPs. On MikroTik, add interface wireguard, peer, address, route, DNS, firewall NAT masquerade for traffic from LAN. Also OpenVPN client alternative.

Need be accurate with MikroTik commands / Winbox. Since no actual access, provide practical instructions.

Need mention personal account at proxify.host and official app: "в личном кабинете proxify.host создайте конфигурацию WireGuard" and "Официальное приложение Proxify VPN может показать готовый QR-код/файл конфигурации". Need avoid false specifics? We can say "в разделе WireGuard".

Need structure:

Настройка Proxify VPN на MikroTik

Введение

Proxify VPN supports WireGuard/OpenVPN. On MikroTik best use WireGuard. Need RouterOS 7.x. Check version.

Шаг 1. Подготовка

• Update RouterOS to 7.x
• Access terminal/Winbox
• Have LAN subnet, e.g. 192.168.88.0/24.

Шаг 2. Получение конфигурации WireGuard в личном кабинете

• Login proxify.host
• Create/config "WireGuard" for router
• Copy allowed IPs, endpoint, server public key, private key, addresses. Example config.

Шаг 3. Настройка WireGuard на MikroTik

Commands:

/interface wireguard add name=proxify private-key="..."
/interface wireguard peers add interface=proxify public-key="..." endpoint-address=... endpoint-port=... allowed-address=0.0.0.0/0
/ip address add address=10.100.0.2/24 interface=proxify

But need be careful: In WireGuard, allowed-address on peer determines what remote IPs route through tunnel. If 0.0.0.0/0 route all internet through tunnel. But need also route? Actually WireGuard automatically creates routes for allowed-address? In RouterOS, for peer allowed-address is "allowed address within tunnel". Need set to 0.0.0.0/0 if want proxy all. Then need add route via interface? Let's recall MikroTik WireGuard: Add interface, IP address on it (private address from config), add peer with allowed-address and endpoint. Then add route dst-address 0.0.0.0/0 gateway wireguard interface. Also if using allowed-address=0.0.0.0/0, RouterOS may create dynamic route? I think WireGuard peer allowed-address is used as route destination; in RouterOS, when allowed-address is 0.0.0.0/0 it creates default route? Not sure. To be safe, specify route.

Config from Proxify likely includes:

[Interface]
PrivateKey = ...
Address = 10.100.0.2/32
DNS = 10.100.0.1

[Peer]
PublicKey = ...
AllowedIPs = 0.0.0.0/0
Endpoint = eu.proxify.host:51820

On MikroTik:

/interface wireguard add name=proxify private-key="..."
/interface wireguard peers add interface=proxify public-key="..." endpoint-address=eu.proxify.host endpoint-port=51820 allowed-address=0.0.0.0/0
/ip address add address=10.100.0.2/24 interface=proxify
/ip route add dst-address=0.0.0.0/0 gateway=proxify

Need DNS? Can set /ip dns set servers=... allow-remote-requests=yes.

Need ensure UDP port 51820? Actually endpoint port from config.

Need if DNS resolve? endpoint-address accepts hostname? In RouterOS endpoint-address can be IP or name? I think in /interface wireguard peers, endpoint-address expects IP or hostname? In recent RouterOS, can be hostname? Need check. To avoid issue, resolve hostname to IP on PC and use IP. We can say "Если endpoint указан как DNS-имя, сначала выполните :resolve или используйте IP-адрес из конфигурации." But maybe RouterOS 7 supports hostname for endpoint? I think yes? Actually /interface wireguard peers create endpoint-address supports IPv4/IPv6, not sure. We can mention use IP from ping or resolve.

Need include firewall NAT masquerade for LAN: Because MikroTik router clients need NAT to VPN. But if default route via VPN, outbound packets from LAN go through tunnel. Need masquerade on proxify interface? Actually NAT masquerade for outbound interface. Need add:

/ip firewall nat add chain=srcnat out-interface=proxify action=masquerade

This allows LAN devices to access internet via tunnel.

Need also avoid killing router access? If default route changed, need ensure local bridge traffic not affected. The route default via wireguard only for internet. Need maybe add route to VPN server via current ISP gateway to avoid recursive route? This is important. When adding default route via WireGuard, if endpoint is remote IP, need a route to that endpoint through WAN. WireGuard can have endpoint based on DNS; normally you already have default route via WAN. But when you add default route via WireGuard, route to endpoint via WAN remains? Actually before adding default route, WAN default route covers endpoint. After replacing default route with WireGuard, WireGuard-generated dynamic route to endpoint? I think RouterOS creates route to peer endpoint via the interface where it learned? Need not. To be safe, add static route for endpoint IP via WAN gateway. Ask user to identify WAN gateway. Example:

/ip route add dst-address=eu.proxify.host/32 gateway=192.168.1.1

But if endpoint hostname, need resolve. We can include.

Need mention "Разделы личного кабинета: Servers, Configurations, WireGuard". Need not overdo.

Need maybe include OpenVPN alternative. Since services includes OpenVPN. For MikroTik, OpenVPN client can be configured too. Need provide less detailed maybe. But the topic "настройка Proxify VPN on MikroTik" could include both? Since Proxify supports WireGuard and OpenVPN. But requirement "protocols WireGuard and OpenVPN" maybe should mention. We can focus on WireGuard as recommended, then "Альтернатива: OpenVPN" with steps. Length okay.

Need include "official app" in intro maybe: "Официальное приложение Proxify VPN удобно для телефона, но на роутере используем конфигурацию из личного кабинета."

Need "Возможные проблемы и решения" section:

• WireGuard interface not turning on / handshake not established: check firewall UDP port, endpoint IP, public key, allowed-address.
• Router loses internet after default route: add static route to VPN endpoint via WAN gateway, check NAT masquerade.
• DNS leaks: set DNS server from Proxify (e.g., 10.100.0.1) and disable DNS? Actually need /ip dns set servers=10.100.0.1.
• Slow speed: choose nearest server, check MTU, disable fragmentation. WireGuard MTU 1420. In RouterOS maybe /interface wireguard set mtu=1420. Need mention.
• Cannot connect after RouterOS upgrade: disable IPv6? no.

Need provide code blocks.

Need be careful with "personal cabinet paths" not overly specific. "В личном кабинете на proxify.host зайдите в раздел «WireGuard» или «Приложения/Конфигурации», выберите нужную страну и сервер, затем создайте конфигурацию. Скопируйте приватный ключ, публичный ключ сервера, адрес и порт endpoint." That is plausible.

Need maybe "AllowedIPs = 0.0.0.0/0" means all traffic through VPN, and "DNS = ..." in config. Need tell to download config file or show QR. MikroTik can't scan QR; manually copy.

Need "Address" in WireGuard config: usually a /24 or /32. On MikroTik, add IP address with same prefix. Example "Address = 10.100.0.2/32" from Proxify? Actually for WireGuard, address can be with subnet. In config generated by service, often Address = 10.77.0.2/32. With /32, on MikroTik if add /32, you won't have route to VPN DNS? But peer allowed-address includes tunnel network? Need better: Add address as 10.77.0.2/24 to set up route to VPN subnet. But if DNS server is 10.77.0.1, need route. We can say "Address из конфига может быть с /32. Для MikroTik добавьте как /24 или уточнённый префикс из личного кабинета, например 10.77.0.2/24." Is that safe? Actually maybe wrong. In WireGuard config, "Address = 10.77.0.2/32" means the interface address itself; on Linux, route to peers allowed-IPs are used. On MikroTik, interface has address 10.77.0.2/32; but to connect to DNS 10.77.0.1, peer allowed-address includes 0.0.0.0/0, so route to DNS via tunnel exists. But local interface address /32 is enough. However if peer allowed-address includes 0.0.0.0/0, default route via tunnel covers. For static route via interface, gateway=proxify works regardless. So /32 is okay. Need maybe set /24 to have local network? Not necessary. But if we need to reach 10.77.0.1, route exists via allowed-address? Actually for WireGuard peers in RouterOS, allowed-address adds a route to remote addresses, but if allowed-address = 0.0.0.0/0, route to 10.77.0.1 exists via tunnel. Fine.

Need perhaps "If your config has DNS = 10.100.0.1, set /ip dns set servers=10.100.0.1 allow-remote-requests=yes."

Need "Use terminal commands" and "Winbox screenshot" not necessary.

Need word count 800-1500. Need write in Russian. Need avoid HTML tags.

Let's craft.

Potential issue: "MikroTik" must have RouterOS v7. Proxify supports WireGuard? We can mention "WireGuard доступен в RouterOS 7". For RouterOS 6 use OpenVPN. Need mention.

Detailed steps:

1. Подготовка и доступ

• Connect to router, check version:

/system package print

If RouterOS 7+.

2. Get config from proxify.host

• Login, "WireGuard" section, "Создать конфигурацию"
• Choose server, "Router/WireGuard" format.
• Example config:

[Interface]
PrivateKey = xxxxxxxxxxxxx
Address = 10.100.0.2/32
DNS = 10.100.0.1
[Peer]
PublicKey = yyyyyyyyyyyyyyy
AllowedIPs = 0.0.0.0/0
Endpoint = de-1.proxify.host:51820

Need note "В конфигурации могут быть другие имена полей."

3. Настройка WireGuard on MikroTik

• Add interface:

/interface wireguard add name=proxify private-key="xxxxxxxxxxxxx"

• Add peer:

/interface wireguard peers add interface=proxify public-key="yyyyyyyyyyyy" endpoint-address=de-1.proxify.host endpoint-port=51820 allowed-address=0.0.0.0/0

But if hostname in endpoint-address unsupported, need resolve:

:put [:resolve de-1.proxify.host]

Then use IP.

• Add IP address:

/ip address add address=10.100.0.2/32 interface=proxify

• Allow all traffic through interface:

/interface wireguard set proxify mtu=1420

• Add default route:

/ip route add dst-address=0.0.0.0/0 gateway=proxify routing-table=main

• Need preserve route to VPN server if endpoint is remote. On current WAN gateway identify:

/ip route print where comment="" 

Let's write: Before changing default route, find existing default route:

/ip route print

Take gateway IP, add specific route:

/ip route add dst-address=de-1.proxify.host/32 gateway=<ваш-локальный-шлюз> distance=1

But if endpoint is hostname, after resolving. This is important.

• NAT for LAN: